Wholesale China Stages Of Inspection In Production Factories Pricelist – Toy Inspection – EC

Children’s food and clothing have always been of great concern to parents, especially the toys that are closely related to children are also essential for children to play every day. Then there’s the issue of toy quality, which everyone is particularly concerned about because they want their own children to have access to qualified toys, so QC quality personnel also take on a very important obligation to each toy product requires high quality control, qualified toys sent over to all children. There are many ways of inspection and measurement standards for QC quality inspection of toys.

Toys have the following standards of shape, the sharp-edged standard, the British standard is that toys for children 4 years of age or older cannot have any sharp edges, and toys for children 4 years of age or older, 8 years of age or younger, must have clear warning language signs. Children and adolescents who are mature enough to read the issues. European standards are under three years of age children and adolescents toys can not have all sharp edges, above three years of age in the toy must have a warning language statement. Testing method can be applied to the sharp angle device to accurately measure. Also useful edge standard, UK standard, children under four years of age in toys can not have all sharp corners.

Warning labels must be included in toys for children and teens over age of four. European standard is under three years of age children’s toys can not be sharp edges, toys for children over the age of three must be labeled with warning signs to alert children and their parents. Testing can be done by wrapping the tape tightly around the core to see if the tape is broken. For small objects, a general test objective is set to limit the risk of accidental swallowing or inhalation by young children to the risk of causing ventricular respiration. Scope of application is generally suited to toys for children under three years of age. Most of the test machines and equipment use small objects cylinder testers. Bite force test is to prevent children chew toys in risk of swallowing or inhaling into the mouth, test can be used with bite force tester, the United States has the relevant bite force standards, Europe does not have the standard for the time being. Taping standards are designed to prevent the risk of children and adolescents putting tape on the top of their heads and causing respiratory distress. Testing scope is the entire toy bag, there are thin and open mouth of the prescribed standards, tape on the open hole is also a must, and to print a warning message on the bag to prompt parents to pay attention to the risks.

Besides a number of critical inspection standards above, there are also tossing test standards, the British standard is the toy random orientation after falling 2, each fall must test the sample version. Twisting test standard, tensile test standard, pressure test standard, bending test standard, baby hand swing type pronunciation standard, rope raw material standard these many levels, must everyone’s QC quality staff effectively apply this way and method, do a qualified QC inspection personnel, for the children’s qualified toys service guarantee.